Welcome to Rack19.com

DEPTH	19" ORDER CODE	650 ORDER CODE	800 ORDER CODE
300	03051-01	03051-10	03051-22
400	03051-02	03051-11	03051-23
450	03051-03	03051-12	03051-20
500	03051-04	03051-13	03051-21
600	03051-06	03051-14	03051-24

Vertical Power Distribution Panel
complete with Neon Indicator Light Switch

1RU Cable Retaining Hoop Panel

Fitted with six hoops with open ends this panel fiths
across the racking to provide a sturdy support for
patch cables etc. Finished in black powder coat.

WIDTH	ORDER CODE
19"	02100-01
650	02100-03
800	02100-04

Heavy Duty Flat Shelves Type A

Heavy duty shelves are 1RU high and can carry
loads of up to 50kg evenly distributed.

RU	NEON LIGHT SWITCH ORDER CODE
18	03213-20
27	03213-21
39	03213-22
45	03213-23

Cage Nut Assembly

Comporius M6 cage nut, a nylon washer and an
M6 X 16 pan head cross recess screw with a
bright zinc finish and supplied in pack of 100

ASSEMBLY	ORDER CODE
1 x Nut 1 x Srew 1 x Washer	03025-01

Cable Trays

Roof Fan Tray

Type A/B Roof Fan Tray suit both 19" and 650
Cabinets. When ordering wired fan trays only
partially filled with fans please indicate positions
by reference to the absence of instruction, fans
ordered would be placed A,B,C etc regardless of
the panel size.
All fans are fitted with finger grilles. This unit
does not encroach into the racking area.

Cantilever Shelves

Available in standartd sizes. The shelves are
constructed in three parts - (2 side plates and a
base tray that key together).
Non standartd sizes can be produced.
All trays are vented.
Standard size shelves will carry a load of 30kg
evenly distributed.

Blank Panels

Blank Panels are stocked in 2mm Steel for Painted
finish and in 2mm Aluminium for Natural and
Black Anodise finish.
Stock sizes are from 1RU trought to 12RU x 19"
Sizes larger than 12 RU can be made to order.
This design has been bought into line with our
Vented and Patch Panels for greatly improved
visual effect. The introduction of top and bottom
flanges ensures no panels will bow, event when
phused against. Whilst the Anodised Panels are
offered, painted or powder coat is recommended.
See colour chart on inside rear cover.

Available in 3 widths and usually mouted
vertically up the sides of rack frame (horizontal
trays are also available). Their use provides a
traceable wire management sytem and they are
frequently used in conjuction with horzontal
lacing bars.
They trays are available in 100mm, 150mm and
225mm width and are finished in black powder
coat.

19" Fan Panels

The 3RU fan panel is punched to accept
120mm Muffin Type fans in a standart
3RU x 19" configuration panel.

The panel can be punched to accept 2 or
3 120mm Muffin type fans. The 6RU is
punched to accept 4 fans.*This unit also and
floor mounts in the Series 2001 cabinet.